Custom Millwork and Slat Ceilings in West Hollywood
West Hollywood
Element Decor is a family-owned millwork shop in Chatsworth, working since 2014. We make slat ceilings, wall panels, reception desks and built-ins for West Hollywood homes, clinics, studios and restaurants, built in our own shop and installed by our own crew.
One finished project here: a slat ceiling with integrated lighting and wall panels for a cosmetology clinic, installed in February 2024.
Updated · Chatsworth, Los Angeles
- Project here
- Slat ceiling, lighting and wall panels for a clinic, 2024
- What we build
- Slat ceilings and walls, wall panels, reception desks and commercial millwork
- Ceiling
- Slat runs with integrated indirect lighting
- Walls
- Closed, wipeable finish for rooms that are cleaned constantly
- Service access
- Lighting drivers kept reachable behind the run
- Where
- The Sunset Strip, the Norma Triangle, West Hollywood West and the Design District along Melrose, Robertson and Beverly
- Lead time
- 4 to 6 weeks of production after shop drawings are approved
- Trade
- Trade pricing for designers, architects and builders once an account is approved
- Shop
- 20371 Prairie St, Chatsworth, CA 91311
- Install
- Our own crew
- Before you commit
- A layout and a 3D preview of the room
The ceiling does the work
In the West Hollywood clinic the ceiling does the work. Slats run the length of the treatment area with lighting integrated into the voids, so the light is soft and indirect where clients are lying down and looking straight up.
Clinical rooms are wiped down constantly, so the wall panels below were finished in a closed, cleanable surface rather than an open grain. The ceiling was set out around the existing services, and the driver access was kept reachable so the lighting can be maintained without pulling slats off.
Commercial interiors run on someone else's schedule. We work directly with designers and contractors, and the drawing is where the slat rhythm, the light positions and the service access are agreed before anything is cut.
Projects in and around West Hollywood
Built in West Hollywood
How a fit out runs
- Send the plansFloor plan or reflected ceiling plan, room heights and photos of the space.
- Set out the ceilingSlat rhythm, light positions and service access agreed on the drawing.
- Choose the finishClosed and cleanable where rooms are wiped down, open grain where they are not.
- Coordinate with the siteWe work with your designer and contractor on the schedule.
- Fabrication and dry fitCut, finished and dry fitted in Chatsworth.
- InstallationOur crew installs it. One shop from drawing to install.
Questions
Do you work in West Hollywood?
Yes. West Hollywood is inside the area our own crew covers. We completed a clinic slat ceiling with integrated lighting here in February 2024.
Can a slat ceiling have lighting built in?
Yes. On the clinic ceiling the lighting sits in the voids between the slats, so the light is soft and indirect for someone lying down and looking up.
What finish works in a clinic?
Rooms that are wiped down constantly get a closed, cleanable finish rather than an open grain.
Can the lighting be serviced later?
Yes. The driver access was kept reachable behind the run, so the lighting can be maintained without pulling slats off.
Do you work with designers and contractors?
Yes. We work directly with designers and general contractors and coordinate with the site schedule.
What does a project like this cost?
Every job is quoted from its own drawings. As a guide, simple paneled walls run $4,000 to $10,000 and more complex walls $15,000 to $20,000. Slat ceilings and commercial fit outs are quoted from the plans, with lighting priced separately.
How long does a project take?
Production takes 4 to 6 weeks after the shop drawings are approved. We template the wall after drywall, then build, finish and dry fit the work in Chatsworth before our crew installs it.
Related
- Slat ceiling, panels and lighting for a clinic, West Hollywood
- Commercial millwork contractor in Los Angeles
- Clinic and studio millwork in Los Angeles
- Office wall panels and partitions in Los Angeles
- Restaurant and bar millwork in Los Angeles
- Custom wood ceilings in Los Angeles
- Wood slat walls
- Brentwood
- Bel Air
- Beverly Hills
- Trade program
- Architectural millwork in Los Angeles
- All Westside neighborhoods
Fitting out a clinic, a studio or a restaurant? Send the plans or a reflected ceiling plan. You get back a layout, a price and a 3D preview before anything is cut.
Get a quote for your West Hollywood project
Send the room, rough dimensions and timing. You get back a layout, materials and a real price. Nothing is cut until you approve the drawings.
- Drawings and a 3D preview of your own room before anything is made
- Built in our own Chatsworth shop and installed by our own crew
- Licensed and insured in California
Prefer to talk? 323-431-3818